I know it will work well despite the reader`s registration, but my end user is not a computer scientist and he is kind of confusing them after the last 20 years with C: reader. Only for registration and without any offense to any other method/tool and their respective authors, I would like to try the winsetupFromUSBwithGUI approach, which is the most tested approach – I think – (successfully). I set the hard drive to launch it before the USB stick, and I used F12 to get a priming menu. Nevertheless, the Windows files were copied to the USB drive. Before he started copying, he said: “Review 80GB disk” or something on this scale, which is the hard drive. Setup knows that the disc is available. The first score is FAT32 8GB, active set. The second partition is NTFS 65GB, logically expanded. As mentioned above, it works well when I install Windows from an optical drive (same partition scheme: Windows installs on 8GB FAT32). I tried to install xp on a netbook with linux with rufus. It seems that Flashdisk is a bootable player now and is trying to install xp on the netbook, but there is an error saying “Setup can find the end user Licencing Agreement” (EULA) and then end the setup. If a file cannot be found, it is likely that it will not find another file. This is just one to give the error.
The most common problem is that your source-XP does not contain the right hard drive players for your system. If your BIOS is set up for SATA AHCI mode, change it to Legacy IDE mode. If you can`t change AHCI/SATA`s BIOS mode, you must either get an XP installation CD/ISO with built-in mass storage sensors, or use Easy2Boot with the Mass Storage Driver Pack. Full error message: “Configuration can`t find the end user license agreement (EULA) also a look here superuser.com/a/623998/63915 4), when Windows copied the installation files and the installation is on the previous start-up point it is used to hpt3xx .sys missing file error I extracted the file from i386.” driver.cab i3 86 folder and bypassed the folder hpt3xx.sys errror I even searched in the iso file and I can find the Eula file in txt, so I do not know why it always repeats that we had the problem of the absence of LAE (“Setup can not find the end user license contract”). I used Rufus 1.3.4. In advanced format options, you can change the BIOS IDENTIFIANT. The BIOS STANDARD ID was set by Rufus at 0x81. I tried to 0x82 that made the PC restart forever. Then I tried to 0x80 and went past the LABO message and was able to format the partition and the installation files were copied onto the score.
Unfortunately, after a reboot, I launched the error message “Windows couldn`t start because the next file is missing or corrupted: -System32-hal.dll Thanks for reinstalling a copy of the file above.” I could solve this problem by repairing the start file.ini on the target PC hard drive and doubly replacing “multi(0)disk (0)rdisk (1) partition (1)” with “multi (0)disk (0) rdisk (0) partition (1)”. I tried to use two programs, but still failed until I found this forum. I have to continue the installation, and this error occurs. Setup cannot find an end-user license agreement (BAL). We also had the problem of the absence of EULA (“Setup can`t find the end user license agreement”). I could solve this problem by repairing the start file.ini on the target PC hard drive and doubly replacing “multi(0)disk (0)rdisk (1) partition (1)” with “multi (0)disk (0) rdisk (0) partition (1)”. “Windows couldn`t start because the next file is missing or corrupted: This is due to the fact that the large hard drive is not formatted with xp 2) I delegate on a laptop Dell Inspiron 1440 it has a HARD drive SATA (probably) pcsupport.about.com/od/operatingsystems/ss/instxpclean1.htm To the question of what was your best career decision? Windows could not start because the next file is missing or corrupted: system32-hal.dll Reinstall a copy of the file above.